This guide is intended to give design engineers the basic facts needed to begin the process of designing effective rubber seals, gaskets and weather stripping. It is not intended to provide every piece of information available on the process or extrusion, the amount of information available is simply too great. However, it should serve as a starting point and give engineers the necessary information to better understand what they will need to consider during the design process.
Selecting the best elastomer for an application involves answering some questions. Temperature and other environmental factors can affect the long-term physical properties of a compound. Therefore, unless a particular application already exists, gathering information on which to base a decision can sometimes be a difficult process.
The following checklist provides several characteristics that need to be taken into consideration when specifying an elastomeric compound. It’s important to know which physical, mechanical, and chemical resistance properties are required. It’s also important that a material is compounded and tested to meet any necessary industrial specifications such as UL, ASTM, SAE, NSF International and U.S. Military Standards.
- Tensile Strength
- Hardness range or compression deflection requirements
- Compression set at room and operation temperatures
- Aging in sunlight, ozone, heat, storage, etc.
- Color (if color matching is desired or necessary)
- Reaction to acids or caustics
- Hydrocarbon solvents
- Oxygenated solvents
- Flame or temperature extremes
- Speed or recovery from deflection
- Permeability to gases
Listed on table 1 and 2 are brief summaries of the properties of seven of the most versatile polymers , and physical and chemical comparison charts for seven polymer materials. These lists are by no means all-inclusive. However, a majority of sealing, gasketing, and weather stripping needs can be met by using these popular materials.
Silicon (Polysiloxane) features excellent resistance to ozone, sunlight and oxidation, and is very color stable. It also maintains excellent flexibility at low temperature, has outstanding resistance to high heat, has low compression set and is a very good electrical insulator. However, it is not recommended for applications that require abrasion resistance, tear and cut growth resistance and high tensile strength. Nor is it recommended for resistance to oil, gasoline, solvents, alkalis, and acids.
EPDM (Ethylen-Propyline-Diene-Monomer) is well known for its excellent ozone, weathering and aging resistance. It also has excellent water and stream resistance, maintains its flexibility at low temperatures, features excellent resistance to alkalis, acids and oxygenated solvents, and is very color stable. It is not recommended for resistance to oil, gasoline and hydrocarbon solvents. EPDM is found in a wide range of applications and is excellent for outdoor use.
Neoprene (Polychloroprene) has moderate resistance to oils and gasoline. It features good flame resistance, weathers well and has very good resistance to abrasion, flex cracking, alkalis and acids. However, expect poor resistance to aromatic and oxygenated solvents and limited flexibility at low temperatures. Neoprene is generally considered an excellent all-purpose elastomer with a solid balance of properties and few limitations.
Nitrile (Acrylonitrile-butadiene) has very good oil and abrasion resistance to alkalis and acids increases as the nitrile content of the compound increases. Nitrile must be specially compounded for resistance to ozone, sunlight and natural aging. It has poor resistance to oxygenated solvents. Nitrile is superior to neoprene in oil and solvent resistance, but is not recommended for applications where it is exposed to severe weathering.
PVC Nitrile provides premium performance and long-term reliability in very harsh and corrosive environments. Their exceptional resistance to heat aging and a broad range of fuels, solvents and chemicals makes them ideal for many demanding aerospace, automotive and industrial applications. Fluoroelastomers also offer excellent resistance to weather, ozone, oxygen and sunlight, and are inherently more flame retardant than hydrocarbon rubbers. Fluoroelastomers have poor resistance to ketones, ester, ethers, amines and aqueous bases (e.g., ammonia and sodium hydroxide).
TPE (Thermoplastic Elastomers) are materials that have the properties and performance of rubber but are processed like thermoplastics. Their performance properties are similar to conventional thermosets such as EPDM or neoprene. The important features of TPE are that they are flame resistant, possess resistance to aliphatic and aromatic hydrocarbon solvents as well as oil and gasoline.
PVC has excellent impact strength, good resilience, tensile strength, abrasion resistance and maintains flexibility at lower temperatures. It is not the polymer of choice when resistance to oil, gasoline and hydrocarbon solvents is required. SBR materials are also not suitable for exposure to the outside elements such as UB and ozone. Typical uses of SBR have been in tire treads, conveyor belt covers, mats and even shoe soles.