Design Guide: Spec Sheets & Testing Data
This guide is intended to give design engineers the basic facts needed to begin the process of
designing effective rubber seals, gaskets and weather stripping. It is not intended to provide every piece of
information available on the process or extrusion as the amount of information available is simply too great.
However, it should serve as a starting point and give engineers the necessary information to better understand
what they will need to consider during the design process.
Materials Policy
Safety Data Sheets
Compression Data
Rubber Seal
(Open file, right click & select Save As to save a copy)
Product Spec. Sheets
Co-Extrusions
(Open file, right click & select Save As to save a copy)
Drip Rail
(Open file, right click & select Save As to save a copy)
Edge Guard
(Open file, right click & select Save As to save a copy)
Edge Trim
(Open file, right click & select Save As to save a copy)
Flap Seal
(Open file, right click & select Save As to save a copy)
Hatch Seal
(Open file, right click & select Save As to save a copy)
J-Clips
(Open file, right click & select Save As to save a copy)
Lip Guard
(Open file, right click & select Save As to save a copy)
Locking Gasket
(Open file, right click & select Save As to save a copy)
Locking
Key
(Open file, right click & select Save As to save a copy)
Rubber Seal
(Open file, right click & select Save As to save a copy)
Rubber-Lok
(Open file, right click & select Save As to save a copy)
Snap In Seal
(Open file, right click & select Save As to save a copy)
Trim Seal
(Open file, right click & select Save As to save a copy)
Tape Spec. Sheets
Product Supporting Testing Data
(Open file, right click & select Save As to save a copy)
TPRFR UL94 VO
(Open file, right click & select Save As to save a copy)
ROHS Certificate of Compliance
(Open file, right click & select Save As to save a copy)
Buy America
REACH
(Open file, right click & select Save As to save a copy)
US EPA Rule Regarding PBTs
(Open file, right click & select Save As to save a copy)