Search Our Products

Browse Products

Technical Information

Adhesive Rubber Fender Flares (DD6234BT)

Home  »  Fender Flare & Fender Flare Trim  »  Adhesive Rubber Fender Flares

Customize Your Product:

About This Peel-and-Stick Adhesive Fender Flare

Trim-Lok’s Peel-and-Stick Fender Flare is designed to install quickly and easily without any need for drilling or bolting.

Made of EPDM dense rubber, this stick-on fender flare utilizes our push-on edge trim and 3M automotive-grade tape for a permanent installation.

Rubber Fender Flare Solutions

Rubber fender flares protect your vehicle by shielding your truck body from debris that are kicked up during driving. They also hold up well to extreme weather conditions, resisting moisture like rain, sleet and snow, as well as dirt and debris. Made of an ozone-resistant co-extruded EPDM dense rubber, this fender flare molding is durable and easy-to-install.

Whether you need to replace worn-out fender flares or you're installing fender flares for the first time, our stick-on fender flares fit tightly against the vehicle body to provide an attractive finish while protecting your vehicle body from damage.

Lab testing shows that over 30 pounds of force per inch is needed to pull it off! Not sure if a rubber fender flare is right for your application? Contact a sales rep for more information.

Patent # 10,668,955

Color Options *
Length Options
Customer Part Number (Optional)
  • Buy 10 or more and pay $367.43 each (save $56.98 each)
  • Buy 50 or more and pay $332.57 each (save $91.84 each)

For volume pricing above 5,000 feet, please contact Trim-Lok at 888-874-6565

*Price breaks, where applicable, will be reflected in cart*

Please note that international orders cannot be processed online. To place an order for international shipping, please contact Trim-Lok at 888-874-6565.

Price: $424.41

Part Number: DD6234BT

Why Choose Stick-On Fender Flares?

We’ve designed our rubber fender flares to require no drilling or bolts—making installation quick and easy every time and effectively eliminating the risk of rust or corrosion at vulnerable drill sites. A variety of industries leverage peel-and-stick fender flares, from service and utility trucks to cargo trailers, automobiles, buses, shuttles and more. No matter your industry, Trim-Lok’s adhesive fender flares offer the right protection and grip for your application.


  • Our signature push-on edge trim with internal aluminum wire carrier and gripping tongues provide an expert and permanent grip
  • 3M automotive-grade bonded tape system provides permanent adhesion
  • Lab testing shows that over 30 pounds of force per inch is needed to pull off Trim-Lok Peel-and-Stick Fender Flare
  • This push-on adhesive fender flare eliminates the risk of rust or corrosion that can be caused from drilling and the use of nuts and bolts


For optimum performance, we recommend installing Trim-Lok Adhesive Fender Flare on radiuses of 17" or greater. Applications with smaller radiuses may experience some waviness.


Our stick-on edge trim has a clamping range of .090” to .157”.


Adhesive fender flares are made of co-extruded EPDM dense rubber.

Learn about our innovative stick-on design, contact a sales rep, or download our rubber fender flare brochure below.

  Download Fender Flare Brochure or View Brochure Below

Stick-on Fender Flares, catalog page 1Stick-on Fender Flares, catalog page 2

Learn How to Install Fender Flare Trim

Watch the video to see a demonstration and learn how to install stick-on fender flare trim.


Peel-and-Stick Fender Flare Installation Instructions

Important: Read Before Installation

It is recommended to install adhesive fender flare at an ambient temperature for maximum adherence. Fender flare requires a 72-hour wetting-out period to come to full adhesion strength. Do not expose the application site to extreme cold or heat during that time.

Cleaning and Surface Preparation

It is critical to clean and prepare the application surface properly to remove all contaminates, including dirt or oil. Trim-Lok recommends using a cleaning solution comprised of one-part isopropyl alcohol and one-part water, a clean rag and the application of an adhesive promoter.

  • Step 1: Spray the cleaning solution and wipe with a clean rag. DO NOT use a dirty rag.
  • Step 2: Measure 1 inch from the rim of the substrate. Wear protective gloves and apply adhesive promoter. Allow it to dry thoroughly.
  • Step 3: Measure the substrate’s radial length. If needed, cut the fender flare trim. Allow extra material on each end. To cut through the fender flare, use a pair of wire cutters or straight edge clippers.
  • Step 4: Apply the stick-on fender flare to the substrate. The edge trim should easily push into place. DO NOT remove the peel-off liner. Once the fender flare has been pushed on, use your hand, a rubber mallet or a pneumatic hammer to tap the edge trim to ensure the fender flare is completely pushed on.
  • Step 5: Remove the tape liner in small sections. Use your hands to apply pressure where the tape adheres to the substrate. Repeat until the entire liner has been removed. Any buckles in the peel-and-stick fender flare can easily be manipulated into share with your hands.

Download Peel-and-Stick Fender Flare Instructions